Trunk release kits

Types of Trunk Release Kits

A trunk release kit is a device that is used to open a car's trunk. The kit usually contains a switch, a trunk release cable, and an actuator. There are different types of trunk release kits. They include:

• Electric trunk release kit

  This type of trunk release kit uses an electric motor to open the trunk. When the switch is pressed, a signal is sent to the motor, and it opens the trunk. The electric trunk release kit is very common. It is used in many modern cars. Some cars have a button on the dashboard. The driver can press the button to release the trunk. Other cars have a switch on the trunk lid. Drivers can press the switch, and the trunk will release.

• Manual trunk release kit

  In a manual trunk release kit, the driver has to pull a lever or rope to open the trunk. The manual release kits are found in older cars. Some modern cars also have a manual release kit in case the electric system fails.

• Remote trunk release kit

  A remote trunk release kit allows the driver to open the trunk from outside the car. A remote control sends a signal to the car. When the signal is received, the trunk release switch is activated, and the trunk opens. The remote trunk release kit is very useful. It allows drivers to open the trunk when their hands are full or when it's dark and they can't see the trunk. The remote control is usually integrated into the car's key fob.

• Trunk popper kit

  A trunk popper kit is an aftermarket kit that is installed in a car to enhance the trunk release mechanism. When the button is pressed, a mechanism is activated that pops the trunk open. The trunk popper kit is very useful when the trunk lid is damaged, or the electric release system is faulty. Trunk popper kits are available in different sizes and designs. Some are powered by compressed air while others have spring mechanisms.

Specification & Maintenance of Trunk Release Kits

• Trunk release cable

  The trunk release cable is available in a variety of sizes, depending on the vehicle. It is made of a flexible and durable material, such as steel or nylon. The trunk release cable is designed to pull with a force of 10-20 pounds. This means that a person can pull the cable without too much effort, and it is strong enough to open the trunk latch quickly. The trunk release cable is also designed to last for many years of use, with a lifespan of 10,000-20,000 pulls. This means that a person can use the cable frequently without worrying about it wearing out quickly.

• Trunk release handle

  The trunk release handle is available in different styles, such as a lever or button, and is designed to be comfortable to use. It is made of a comfortable material, such as rubber or plastic, and is shaped to fit a person's hand well. The trunk release handle is designed to be accessible and easy to find. It is usually located on the driver's side, near the floor or dashboard. The trunk release handle is also designed to last for many years of use. It is built to be durable and strong enough to pull the trunk release cable repeatedly.

• Trunk release latch

  The trunk release latch is designed to securely hold the trunk door closed. It is built to be strong enough to keep the trunk closed during regular driving, as well as in case of an accident. The trunk release latch is designed to open quickly and easily when a person pulls the trunk release cable. It is built to be simple and have mechanisms that respond quickly to pulling the cable.

• Electric trunk release

  An electric trunk release is a feature in some vehicles that allows the trunk to be opened with a button press, usually located on the key fob or inside the car. It is connected to the car's electrical system and designed to respond quickly when the button is pressed. The electric trunk release is built to be safe and secure. It has safeguards to ensure the trunk cannot be opened accidentally, such as requiring a long press or being only functional when the car is in park. It also has alerts to let a person know when the trunk is opening, like a beep or light.

Maintaining trunk release kits is crucial to ensure they operate smoothly and safely. Here are some general tips for maintaining trunk release kits:

• Inspect the cables

  It's essential to inspect the trunk release cables regularly for signs of wear, fraying, or damage. If any damage is found, replace the cables immediately to avoid failure.

• Lubricate moving parts

  Use a silicone-based lubricant to lubricate the moving parts of the trunk release handle and latch. This will help them move smoothly and reduce wear.

• Check the trunk release handle

  It's important to check the trunk release handle regularly to ensure it works correctly. If it feels loose or doesn't return to its original position, replace it.

• Inspect the trunk release latch

  Regularly inspect the trunk release latch for signs of wear or damage. Ensure it opens and closes smoothly and securely. If you notice any problems, replace the latch promptly.

• Clean the trunk release parts

  Over time, dirt and debris can build up in the trunk release handle, cable, and latch, affecting their performance. Clean all trunk release parts regularly with a mild detergent and water to remove any dirt or debris.

• Check the electric trunk release system

  If the vehicle has an electric trunk release, check the electrical connections and fuses regularly. Ensure everything is working correctly and replace any faulty parts.

How to choose trunk release kits

A trunk release kit is a vital safety tool for both car owners and emergency personnel. With the trunk release kit, one can quickly open the trunk of a car without causing any damage to the vehicle. However, not all trunk release kits are created equal. Here are some factors to consider when choosing a trunk release kit:

• Ease of use: When choosing a trunk release kit, consider how easy it is to use. Kits that come with detailed instructions and are easy to use are the best choice. Also, consider the design of the trunk release tool. Choose a kit with a comfortable and ergonomic design tool. This will enable the technician to use the tool for a long time without experiencing fatigue.
• Quality: Look for high-quality trunk release kits. The best type of trunk release kit is made from high-quality materials such as stainless steel. This type of trunk release kit is durable and can withstand frequent use. Also, avoid kits made from cheap materials because they can break or bend easily, which can render the tool useless.
• Portability: Another factor to consider when choosing a trunk release kit is portability. Look for a kit that is lightweight and comes in a case or pouch. This will make it easy to carry and store the trunk release kit in the car.
• Safety: Trunk release kits are designed to promote safety. When choosing a trunk release kit, look for a kit that has a safety lock mechanism. The safety lock mechanism helps to prevent the tool from accidentally opening the trunk during use.
• Compatibility: Before purchasing a trunk release kit, consider the compatibility of the tools in the kit. Different vehicles have different trunk release mechanisms. Choose a kit that comes with tools that can be used on different types of vehicles with various trunk release mechanisms.

How to DIY and Replace Trunk Release Kits

Car owners can install a new trunk release kit themselves. Here is a step-by-step guide on how to do it:

First, gather all the tools required for the installation. These may include:

• Trunk release kit
• Wiring tools
• Screwdrivers
• Drill
• Socket set
• Electrical tape

Once the tools are ready, follow these steps:

• Remove the Trim

  Take out the trunk's inner lining or door trim. This will allow access to the trunk's interior.

• Install the Release Handle

  Mount the release handle on the trunk's access panel. Then, connect it to the trunk latch.

• Connect the Trunk Release Cable

  Run the trunk release cable through the handle to the trunk's latch.

• Connect the Electrical Wires

  Connect the electrical wires to the trunk release button and the remote control.

• Test the Trunk Release Kit

  Before reassembling, test the trunk release kit to ensure it works properly.

• Reassemble the Trim

  Once satisfied with the test results, reassemble the inner trim lining or door panel.

• Secure with Screws or Clips

  Use screws, clips, or adhesive to hold the trim pieces in place. Ensure they are tight to prevent rattling or noise.

• Check Functionality

  After reassembling, double-check the trunk release kit's functionality. Test the handle, button, and remote control to ensure they work smoothly.

• Final Inspection

  Perform a final inspection to ensure all components are securely installed, and no tools or loose parts are left in the trunk.

Q and A

Q1: What is a trunk release kit?

A1: A trunk release kit is a kit put together to enable car owners to release and open the trunk. Usually, the trunk can be opened by pulling a lever or pressing a button. The kit has wiring and components that connect the button to the trunk latch and the remote control to the trunk latch. The trunk release kit can be manual, electric, or remote-controlled.

Q2: How does a trunk release kit work?

A2: The trunk release kit is connected to the trunk latch. When an owner activates the release (by pulling the lever or pressing a button), it sends a signal to the trunk latch, and the latch disengages, allowing the trunk to open.

Q3: Can all trunks be fitted with a trunk release kit?

A3: Yes, all trunks can be fitted with a trunk release kit. However, installing a trunk release kit on an old car may be challenging.

Q4: Is it easy to install a trunk release kit?

A4: It is easy to install a trunk release kit. However, the ease of installation depends on the type of kit being installed and the car's make. Installing a trunk release kit can be a simple DIY project. The kit contains instructions and a wiring diagram that help connect the button to the latch.