Pcx150 scooter engine

Types of PCX150 scooter engines

The Honda PCX150 scooter is available in many countries and is known for its stylish design and fuel-efficient, high-performing, liquid-cooled, and 4-stroke engines. The PCX150 has some differences in its engine depending on the year it was made to meet the different emission requirements of different countries. Below are the types of PCX150 scooter engines.

• eSP Engine

  The Enhanced Smart Power (eSP) engine is a modern engine that was introduced in the PCX150 in 2014. This engine offers more power and is also fuel-efficient. The eSP engine has a higher compression ratio, which allows it to produce more power without using more fuel. This engine is also equipped with a cooling system that helps to maintain the right temperature, which also helps in having a high performance engine. The eSP engine in the PCX150 scooter also has a balancer shaft, which makes the engine run smoothly, reducing the vibrations that are felt when riding the scooter. The eSP engine technology is used in other Honda models too.

• eSP+ Engine

  The eSP+ engine is an upgraded version of the eSP engine. The eSP+ engine is featured in the PCX150 scooters from 2018. The eSP+ engine takes efficiency a notch higher. This engine has a lower internal friction, which means there is less resistance and the engine runs more smoothly. The eSP+ engine also has an upgraded cooling system with a larger radiator and cooling fan. This helps to increase the engine's power while keeping it cool. Another important feature of the eSP+ engine is the ACG starter, which replaces the conventional starter motor. The ACG starter is lighter and helps to start the engine with less effort. This is very important when trying to start the engine. The eSP+ engine and ACG starter also contribute to a smooth and quiet ride.

• PCX electric scooter

  The electric PCX scooter is the PCX150 electric version. The PCX150 electric scooter was launched in 2020. The PCX150 electric scooter features an electric motor instead of a gasoline engine. The electric motor is also known for its efficient energy conversion and high torque at low speeds. Electric engines require less maintenance. The PCX150 electric scooter also has a battery management system that helps to monitor the battery's state and health.

Specification and maintenance of PCX 150 scooter engines

Specification

The Honda PCX 150 scooter is a popular choice among riders. Before discussing the maintenance of the PCX 150 scooter engine, let's take a look at its specifications.

• Engine type:

  Liquid-cooled, 4-stroke, 2-cylinder engine.

• Engine displacement:

  149.6 cc

• Engine power:

  11.2 kW (15 hp) at 8,500 rpm

• Engine torque:

  13.8 Nm (10.2 lb-ft) at 6,500 rpm

• Fuel system:

  PGM-FI electronic fuel injection.

• Ignition system:

  Digital electronic ignition.

• Starting system:

  Electric start.

• Transmission type:

  Continuously variable transmission (CVT).

• Frame:

  Steel frame

• Front suspension:

  Telescopic fork, 31.2 mm (1.22 in) diameter, 108 mm (4.3 in) travel

• Rear suspension:

  Dual shock absorbers, 5-step preload adjustment

• Front brakes:

  Single disc brake, 220 mm (8.7 in) diameter, hydraulic 2-piston caliper

• Rear brakes:

  Drum brake, 130 mm (5.1 in) diameter

• Wheels:

  Front: 14 in (35.6 cm) alloy wheel, Rear: 14 in (35.6 cm) alloy wheel

• Tires:

  Front: 90/90-14, Rear: 108/90-14

• Dimensions:

  Overall Length: 2019 mm (79.5 in), Overall Width: 745 mm (29.3 in), Overall Height: 1,091 mm (43.0 in), Wheelbase: 1,370 mm (54.0 in), Ground Clearance: 138 mm (5.4 in), Seat Height: 765 mm (30.1 in)

• Weight:

  145 kg (319 lb) wet weight, including all fluids and full fuel tank

• Fuel capacity:

  8.1 L (2.1 US gallons) fuel tank

Maintenance

Honda PCX 150 scooters usually require basic maintenance, such as regular oil changes and air filter changes. However, other parts need to be maintained as specified to ensure the scooter runs smoothly and lasts longer. Here are some tips on how to maintain the PCX 150 scooter engine.

• Engine oil:

  Check the engine oil level regularly and top up as needed. Change the engine oil and oil filter every 6,000 km (3,750 miles) or sooner if riding in harsh conditions to keep the engine lubricated and protected.

• Air filter:

  Inspect the air filter every 12,000 km (7,500 miles) or more frequently if riding in dusty environments. Clean it with an air filter cleaner or replace it if damaged to ensure proper airflow and engine performance.

• Valves:

  Check valve clearances every 24,000 km (15,000 miles) or at least once every two years, whichever comes first. Adjust them as needed to maintain optimal engine performance and efficiency.

• Fuel system:

  Use high-quality fuel recommended by the manufacturer. Avoid fuel containing more than 10% ethanol (E10) content. Clean the fuel filter every 24,000 km (15,000 miles) or more frequently if riding in areas with poor fuel quality.

• Cooling system:

  Check the coolant level and top up as needed with a 50/50 mixture of Honda genuine coolant and distilled water. Change the coolant every 48,000 km (30,000 miles) or every four years, whichever comes first, to prevent overheating and protect the engine from rust and corrosion.

• Spark plug:

  Inspect the spark plug every 12,000 km (7,500 miles) for wear and carbon deposits and replace it every 48,000 km (30,000 miles) or after four years. Clean the spark plug with a wire brush and air compressor or replace it if damaged to ensure proper ignition and engine performance.

• Fuel system:

  Use high-quality fuel recommended by the manufacturer. Avoid fuel containing more than 10% ethanol (E10) content. Clean the fuel filter every 24,000 km (15,000 miles) or more frequently if riding in areas with poor fuel quality.

• Coolant:

  Check the coolant level and top up as needed with a 50/50 mixture of Honda genuine coolant and distilled water. Change the coolant every 48,000 km (30,000 miles) or every four years, whichever comes first, to prevent overheating and protect the engine from rust and corrosion.

• Electrical system:

  Inspect the battery, cables, and connections for wear or damage every 12,000 km (7,500 miles). Clean the terminals and ensure they are tight and secure. Replace the battery every three years or when it shows signs of wear or damage.

• Tires:

  Check tire pressure and condition every 6,000 km (3,750 miles) or monthly, whichever comes first. Inflate the tires to the recommended pressure and replace them if worn out or damaged to ensure proper handling and safety.

How to choose PCX150 scooter engines

When buying a PCX150 scooter engine for sale, consider the following:

• Engine condition

  Check the overall condition of the engine and its components. Look for signs of wear, damage, or leaks. Consider how many repairs or maintenance services have been done on the engine.

• Engine specifications

  Different PCX150 engines have different specifications. Check the engine capacity, power output, and torque rating. Higher-rated engines offer more power, while lower-rated ones deliver less.

• Fuel efficiency

  Consider the engine's fuel consumption. A PCX150 scooter engine with better fuel consumption is more cost-effective and economical in the long run.

• Warranty and after-sales support

  Check if the supplier or manufacturer offers a warranty and after-sales support service. In case of damages or defaults, buyers can return or replace the engine under warranty.

• Price

  Compare the prices of engines from different suppliers. That will help buyers find a PCX150 scooter engine within their budget. Remember, the quality of the engine should match the price.

How to DIY and replace PCX150 scooter engines

Replacing the PCX150 scooter engine is a complicated task that requires a basic understanding of mechanics and specialized tools. Before attempting to replace an engine, ensure that the warranty has expired. Follow the manufacturer's instructions in the service manual to the letter. Here are some general steps that can be taken to replace a PCX150 scooter engine.

• Read the service manual to understand the procedure and gather all necessary tools.
• Disconnect the battery and drain the fluids (oil and coolant) from the old engine.
• Remove any body panels or covers obstructing the engine's access.
• Follow the manual to disconnect the engine from the scooter's chassis, including electrical connections, fuel lines, and exhaust system.
• Remove the old engine and install the new one by reversing the steps in the disassembly process.
• Reconnect all electrical connections, fuel lines, and the exhaust system.
• Refill the engine with oil and coolant and reconnect the battery.
• Start the engine and check for any leaks or abnormal sounds. Take the scooter for a test ride to ensure everything is working correctly.

It is important to note that safety should always come first. Wear appropriate personal protective equipment (PPE) such as gloves, goggles, and a helmet when working on a scooter. If unsure about any aspect of the engine replacement process, consult a professional mechanic or Honda service center.

Q and A

Q1: What is the PCX150?

A1: The PCX150 is a popular scooter known for its style and efficiency. The PCX150 scooter engine is a liquid-cooled, 4-stroke, 148cc engine. It meets Euro 5 standards and is known for its low fuel consumption. The Honda PCX 150 scooter has a fuel tank capacity of 12 liters and an average fuel consumption of 40-45 km/l. This means that on average, it can go 40 to 45 kilometers on one liter of fuel. PCX 150 engines offer features such as a balance shaft for smooth operation, low emissions, and good performance.

Q2: What are the features of the PCX150 scooter?

A2: The PCX150 scooter has an efficient engine, a comfortable ride, and a stylish design. It also has features such as LED lights, a digital display, and good storage space.

Q3: How is the PCX150 scooter maintained?

A3: Regular maintenance, such as oil changes and valve adjustments, is essential to keeping the PCX150 scooter engine healthy. Using genuine Honda parts is recommended, and keeping the PCX150 scooter engine clean and dry is necessary.

Q4: What are the advantages of the PCX150 scooter?

A4: The PCX150 scooters have many benefits, including good fuel efficiency, low emissions, and being environmentally friendly. It also has a comfortable seat, is easy to ride, and has a stylish and modern design.

Q5: What is the difference between the PCX150 and other scooters?

A5: The PCX150 scooter engine is known for its high performance and efficiency compared to other scooters. It has a comfortable ride and many features, such as LED lights and a digital display.